MOtor control 9 Word Scramble

Embed Code - If you would like this activity on your web page, copy the script below and paste it into your web page.

Normal Size Small Size show me how

Question	Answer
1. Which types of motor control drawings show the physical location of components in a circuit	wiring diagram and pictorial diagram
2. What does the dashed rectangle in the following diagram tell you about the circuit	same enclosure
3. Schematic diagrams do not show the physical ___ or the physical ___ of components in a circuit	size, location
4. DRaw and label both NEMA AND IEC schematic diagrams for the drum heater circuit shown in the text fig 8-1(c)	page 40
5. What voltage is supplied to distribution center MSB1 in this building	480/277 V
6. There are ___ circuit breakers which directly connect to the utility service transformers	2
7. What is the current rating for the circuit breaker used to tie the MSB1 and MSB2 distribution centers together	2000 amps
8. What is the total connected motor horsepower on distribution center MSB2	450
9. Which of the following drawing types does not show the physical relationship between the various components in a motor control drawing	ladder diagram
10. What is the most widely used type of drawing for control circuit analysis	ladder diagram
11. EAch horizontal line in a ladder diagram is identified as a _____	rung
12.Identify eadh of the line types indicated by numbers 1,2,3 on page 41	power rail, control rail, rung
13. In a ladder diagram, pilot devices are placed on the ___ and output deices are placed on the ___	left, right
14. What is the maximum number of output device which are permitted in a single rung	one
15. Draw a two-wire control circuit using a NO pressure switch to start and stop a motor	page 41
16. Draw a three-wire control circuit to start and stop a motor	pg 42
17. Number the following ladder diagram to identify wire numbers for this cuicuit pag 42
18 look at page 43

Created by: JoshHampton