Forcible Entry
Quiz yourself by thinking what should be in
each of the black spaces below before clicking
on it to display the answer.
Help!
|
|
||||
|---|---|---|---|---|---|
| Forcible Entry Tools four basic categories | A-cutting tools, pushing/pulling tools, prying tools, striking tools
🗑
|
||||
| Irons consist of what? | A-flat-head axe and a halligan
🗑
|
||||
| Metal Cutting Devices What is limiting the use of bolt cutters as a viable entry tool? | The continual advancement of security technology.
🗑
|
||||
| Rebar cutters-these hydraulic cutting tools are available in what versions? | Powered and Manual
🗑
|
||||
| Oxyacetylene cutting torches can generate a flame temperature of what? | A-More than 5700 degrees F
🗑
|
||||
| Oxygasoline cutting torches generate a flame temperature of what? | A-In the range of 2800 degrees F.
🗑
|
||||
| Plasma Cutters generate cutting temperatures of what? | A-As high as 25,000 degrees F.
🗑
|
||||
| Plasma cutters require what to operate? | A-A power supply as well as one of several compressed gases.
🗑
|
||||
| Four types of handsaws used in the fire service are? | A-Carpenter’s handsaw, hacksaw, drywall saw, keyhole saw
🗑
|
||||
| Circular saws are especially useful when? | A-Situations where electrical power is readily available and heavier, bulkier power saws are too difficult to handle.
🗑
|
||||
| Reciprocating saws when equipped with a metal cutting blade are ieal for cutting what? | A-sheet metal body parts and structural components on vehicles.
🗑
|
||||
| What are the most commonly used power saws in the fire service? | A-Circular saw, rotary saw, reciprocating saw, chain saw, and ventilation saw.
🗑
|
||||
| Prying tools--The longer the handle..... | A-....the greater the force produced.
🗑
|
||||
| What tool is this.... “the tips of its forked and slightly curved head can be inserted between the door and door frame and driven in by the sliding weight. | Rambar
🗑
|
||||
| Although designed primarily for vehicle extrication, hydraulic rams have spreading capabilities of what range? | A-From 36 to an extended length of nearly 63”.
🗑
|
||||
| How should a firefighter position themself when breaking a window? | A-The FF should stay upwind and be positioned higher than the window so that falling glass will not slide down the handle toward the FF.
🗑
|
||||
| Which push/pull tool is all metal and can be used as a prying tool? | A-roofman's hook
🗑
|
||||
| What PPE should be worn when using a striking tool? | A-Eye protection, helmet
🗑
|
||||
| If the job cannot be done with a particular prying tool, do not strike the handle of the tool, do what? | A-Use a larger prying tool.
🗑
|
||||
| How to carry an axe? | A-Carry the axe with he blade away from the body.
🗑
|
||||
| How to carry pike poles and hooks? | A-outside-head down close to the ground ahead it the body, inside-head upright and close to the body.
🗑
|
||||
| How far can a running power tool be safely carried? | A-no more than 10 feet.
🗑
|
||||
| What should be done to tools that are excessively worn or damaged? | A-Removed from service, tagged and sent to the proper authority for repair or replacement.
🗑
|
||||
| What is an easy to recognize which way a door swings? | A-Look at the location of the hinges.
🗑
|
||||
| What are three types of wooden swinging doors? | A-panel, slab, ledge
🗑
|
||||
| What are the two types of jambs for a wooden swinging door? | A-Rabbeted or stopped jambs
🗑
|
||||
| Most interior doors are? | A-hollow core doors
🗑
|
||||
| Most exterior doors are? | A-Solid core doors
🗑
|
||||
| Ledge doors are also known as? | A-batten doors
🗑
|
||||
| Where are ledge doors found? | A-warehouses, storerooms, barns, sheds, etc.
🗑
|
||||
| What are the three basic types of locking mechanisms? | A-Panic proof, drop arm, metal braced.
🗑
|
||||
| What are the four types of overhead doors? | A-Sectional, tilt-slab, roll-up, telescoping
🗑
|
||||
| What are roll up doors also known as? | A-sheet curtain doors
🗑
|
||||
| When overhead doors must be forced open what tool should be used and how large should the opening be? | A-Rotary saw-Square or rectangular opening 6’ high and nearly the full width of the door.
🗑
|
||||
| What are the four basic types of locks? | A-Mortise lock, bored (cylindrical) lock, rim lock, padlock. Acronym-MR. BP
🗑
|
||||
| On a bored lock how long is the spring-loaded beveled latch bolt? | A-usually no longer than 3/4”
🗑
|
||||
| Dimensions of standard padlock shackles vs heavy-duty padlock shackles? | A-standard-1/4” or less in diameter and not case hardened, heavy duty-more than 1/4” and case hardened.
🗑
|
||||
| What is it called when both ends of the shackle on a padlock are capable of locking? | Toe and heel locking
🗑
|
||||
| Who is responsible for proper mounting of a knox box? | A-The property owner
🗑
|
||||
| What is a j tool? | A-A device made of rigid, heavy gauge wire and designed to fit through the space between double swinging doors equipped with panic hardware.
🗑
|
||||
| A wedge shaped tool that will widen and break the shackles of a padlock? | Duck billed lock breaker
🗑
|
||||
| This tool uses a case-hardened screw that is screwed into the key-way of the padlock. | Bam-bam tool
🗑
|
||||
| What are four common types of windows FF’s will encounter? | A- Double-hung (checkrail) windows, Hinged (casement) windows, Projected (factory) windows, Awning/Jalousie windows
🗑
|
||||
| Lexan is how many times stronger than safety glass and acrylic (plexiglass)? | A-250 times stronger than safety glass and 30 times stronger than acrylic.
🗑
|
||||
| What tools can be used to cut through metal panels with relative ease? | A-Axe, rotary saw, or air chisel.
🗑
|
||||
| Wooden floor joists are typically spaced how far apart? | A-12-24” apart.
🗑
|
||||
| Wooden I-beams are generally spaced how far apart? | A-24” OC regardless of span.
🗑
|
||||
| What is the most efficient tool to open a concrete floor? | A-Pneumatic or hydraulic jackhammer
🗑
|
Review the information in the table. When you are ready to quiz yourself you can hide individual columns or the entire table. Then you can click on the empty cells to reveal the answer. Try to recall what will be displayed before clicking the empty cell.
To hide a column, click on the column name.
To hide the entire table, click on the "Hide All" button.
You may also shuffle the rows of the table by clicking on the "Shuffle" button.
Or sort by any of the columns using the down arrow next to any column heading.
If you know all the data on any row, you can temporarily remove it by tapping the trash can to the right of the row.
To hide a column, click on the column name.
To hide the entire table, click on the "Hide All" button.
You may also shuffle the rows of the table by clicking on the "Shuffle" button.
Or sort by any of the columns using the down arrow next to any column heading.
If you know all the data on any row, you can temporarily remove it by tapping the trash can to the right of the row.
Embed Code - If you would like this activity on your web page, copy the script below and paste it into your web page.
Normal Size Small Size show me how
Normal Size Small Size show me how
Created by:
951bruin