2210- test 1 Peters
Quiz yourself by thinking what should be in
each of the black spaces below before clicking
on it to display the answer.
Help!
|
|
||||
|---|---|---|---|---|---|
| show | light weight
🗑
|
||||
| show | finely woven /organic
🗑
|
||||
| show | polyester
🗑
|
||||
| An approved ___________ usually held by the seller of aircraft covering materials, allows a shop to re-cover an aircraft with materials and processes other than those with which it was originally certificated? | show 🗑
|
||||
| A/An ____________ is a minimum performance standard issued by the FAA for specified materials, parts, processes, and appliances used on civil aircraft. | show 🗑
|
||||
| show | Sealer
🗑
|
||||
| show | 70%
🗑
|
||||
| show | blanket
🗑
|
||||
| Sharp edges, metal seams, the heads of rivets, and other features on the aircraft structure that might cut or wear through the fabric should be covered with ___________ before the new fabric is applied. | show 🗑
|
||||
| show | doped, glued, sewn
🗑
|
||||
| The amount polyester fabric shrinks is directly related to the temperature applied; it can shrink nearly, _____ at 250 °F and _____ at 350 °F | show 🗑
|
||||
| show | rib lacing
🗑
|
||||
| show | drain grommets
🗑
|
||||
| __________ made from the same polyester material as the covering fabric are applied to all seams, edges, and over the ribs to protect these areas by providing smooth aerodynamic resistance to abrasion. | show 🗑
|
||||
| Applied after the sealer coats, the fill coats contain aluminum solids that block ________ from reaching the fabric, thereby increasing its lifespan? | show 🗑
|
||||
| Nitrate dope protects fabric and adheres to it well, but its main drawback is its? | show 🗑
|
||||
| The number of threads per inch in a fabric's warp or filling is known as? | show 🗑
|
||||
| show | Selvage edge
🗑
|
||||
| show | Perform the work in accordance with a Technical Standard Order
🗑
|
||||
| This material holds ribs in their proper place and alignment during the covering process? | show 🗑
|
||||
| Which of these covering systems uses a water-borne base and EkoFill as a filler and UV block? | show 🗑
|
||||
| In preparing the airframe for re-covering, the leading edge of the wing is a critical area because? | show 🗑
|
||||
| show | Start at one end, then move to the opposite end, and switch from side to side before finishing the shrinking in the middle of the surface
🗑
|
||||
| show | 1 inch
🗑
|
||||
| The widest finishing tape is usually used on ? | show 🗑
|
||||
| Most airplanes were constructed of wood frames with fabric coverings during? | show 🗑
|
||||
| show | a. He or she has performed the work concerned at an earlier date and b. He or she lacks prior experience, but is supervised by an appropriately rated person who has that experience
🗑
|
||||
| Some aircraft parts are made of this type of wood, which is an assembled product of wood and glue made up of an odd number of veneers laid up with the grain of each layer placed 90° to the adjacent layer. | show 🗑
|
||||
| The preferred choice for aircraft wood, and the standard to which all other wood is compared, is: | show 🗑
|
||||
| show | Northern white pine
🗑
|
||||
| Mineral streaks are acceptable in replacement wood unless: | show 🗑
|
||||
| This is a clamping device with two rigid wood bars used to keep an assembly of flat panel boards aligned during glue-up | show 🗑
|
||||
| show | The force is applied evenly
🗑
|
||||
| show | Gusset
🗑
|
||||
| show | Splayed patch
🗑
|
||||
| The largest wooden aircraft ever constructed was the _________ which had an empty weight of 300,000 pounds and was powered by eight radial engines, each producing 3,000 horsepower ? | show 🗑
|
||||
| show | 8-12
🗑
|
||||
| show | thin filler gauge
🗑
|
||||
| show | water penetration
🗑
|
||||
| To detect __________ failures in wooden structural members, shine a flashlight beam along the member parallel to the grain and look for minute ridges running across the grain. | show 🗑
|
||||
| show | 1:15
🗑
|
||||
| show | Casein, Plastic resin
🗑
|
||||
| The period between the application of the adhesive and putting the parts of the joint together is called the _________ time. | show 🗑
|
||||
| Adhesive _________ is the time elapsed from the mixing of the adhesive components until the mixture must be discarded, because it no longer performs to its specifications. | show 🗑
|
||||
| All gluing operations should be performed when the ambient temperature is above ________°F for proper performance of the adhesive. | show 🗑
|
||||
| A/An _______ joint is the most satisfactory method of fabricating an end joint between two solid wood members. | show 🗑
|
||||
| show | 3
🗑
|
||||
| show | drill press
🗑
|
||||
| A/An ________ can generally be used on repair holes in plywood aircraft skin, if the hole is not more than 1 inch in diameter. | show 🗑
|
||||
| show | scarf
🗑
|
||||
| show | Methyl ethyl ketone (MEK)
🗑
|
||||
| ___________ also known as white spirit, Stoddard solvent, or petroleum spirit, is the most widely used solvent in the paint industry | show 🗑
|
||||
| show | linseed oil
🗑
|
||||
| A/An _________ is the foundation of a finish-it bonds to the surface, inhibits metal corrosion, and provides an anchor for the finish coats. | show 🗑
|
||||
| show | Polyurethane
🗑
|
||||
| The air supply for paint spraying comes from an air compressor with a storage tank that can provide no less than _____ psi and ____ CFM of air to the gun. | show 🗑
|
||||
| show | Supply air respirator
🗑
|
||||
| show | Viscosity
🗑
|
||||
| Primer is typically applied using a/an _______ spray pattern in which alternating passes of the spray gun are perpendicular to one another. | show 🗑
|
||||
| __________is a dull, milky haze that appears in a paint finish, the result of moisture being trapped in the paint | show 🗑
|
||||
| show | fisheyes
🗑
|
||||
| An incorrect setting on the spray gun can result in _________ meaning that the atomized spray particles dry before reaching the surface being painted. | show 🗑
|
||||
| The preferred masking materials for trim lines are __________tape and quality masking paper. | show 🗑
|
||||
| show | N
🗑
|
||||
| While some older chemical paint stripping products are harmful to the environment or people, __________ eliminates these concerns because it removes paint and primer coats with soft, angular particles that can be reused. | show 🗑
|
||||
| show | Turpentine
🗑
|
||||
| This two-part primer requires a chemical activator to cure, but it is easy to sand and fills well when applied over a wash primer. | show 🗑
|
||||
| show | Lacquer
🗑
|
||||
| show | They are applied in light coats
🗑
|
||||
| Any of these conditions can cause poor paint adhesion with the exception of | show 🗑
|
||||
| show | Orange peel
🗑
|
||||
| Rapid changes in the air temperature during spraying, excessively thick coating, or applying a second heavy coat before the first one dries can result in this condition, which requires the complete removal of the paint. | show 🗑
|
||||
| Before decals are applied, the surface should be cleaned with | show 🗑
|
||||
| If you wipe a painted surface with a rag dampened by MEK and it comes away with pigment from the paint: | show 🗑
|
||||
| show | Airborne chemicals that can be inhaled
🗑
|
Review the information in the table. When you are ready to quiz yourself you can hide individual columns or the entire table. Then you can click on the empty cells to reveal the answer. Try to recall what will be displayed before clicking the empty cell.
To hide a column, click on the column name.
To hide the entire table, click on the "Hide All" button.
You may also shuffle the rows of the table by clicking on the "Shuffle" button.
Or sort by any of the columns using the down arrow next to any column heading.
If you know all the data on any row, you can temporarily remove it by tapping the trash can to the right of the row.
To hide a column, click on the column name.
To hide the entire table, click on the "Hide All" button.
You may also shuffle the rows of the table by clicking on the "Shuffle" button.
Or sort by any of the columns using the down arrow next to any column heading.
If you know all the data on any row, you can temporarily remove it by tapping the trash can to the right of the row.
Embed Code - If you would like this activity on your web page, copy the script below and paste it into your web page.
Normal Size Small Size show me how
Normal Size Small Size show me how
Created by:
Lucas1999