Chapter 6 RQ's
Quiz yourself by thinking what should be in
each of the black spaces below before clicking
on it to display the answer.
Help!
|
|
||||
|---|---|---|---|---|---|
| show | SSD, Magnetic
🗑
|
||||
| What are four speeds in revolutions per minute might the spindle inside a hard drive rotate? | show 🗑
|
||||
| show | Ready Drive
🗑
|
||||
| When the OS addresses the sectors on a hard drive as one long list of sequential sectors, what is this technology called? | show 🗑
|
||||
| show | ATAPI (Advanced Technology Attachment Packet Interface)
🗑
|
||||
| show | 40 pins, 18 in
🗑
|
||||
| show | 133mb/s
🗑
|
||||
| What is the transfer speed for SATA I? SATA II? SATA III? | show 🗑
|
||||
| show | 7 pins for data, 15 pins for power
🗑
|
||||
| What term describes the technology that allows you to exchange a hard drive without powering down the system? | show 🗑
|
||||
| What are the four possible configurations for a PATA drive installed in a system? | show 🗑
|
||||
| Which SCSI ID is assigned to the SCSI host adapter? | show 🗑
|
||||
| Which two SCSI connectors might be used with narrow SCSI? | show 🗑
|
||||
| show | SCSI 2, SCSI 3
🗑
|
||||
| show | Raid 1
🗑
|
||||
| show | Raid 5
🗑
|
||||
| show | 4 drives
🗑
|
||||
| How many pins does a floppy drive cable have? What is the storage capacity of a 3 and a half" high-density floppy disk? | show 🗑
|
||||
| If a motherboard has one blue IDE connector and one black IDE connection, which do you use to install a single drive? | show 🗑
|
||||
| show | BIOS
🗑
|
Review the information in the table. When you are ready to quiz yourself you can hide individual columns or the entire table. Then you can click on the empty cells to reveal the answer. Try to recall what will be displayed before clicking the empty cell.
To hide a column, click on the column name.
To hide the entire table, click on the "Hide All" button.
You may also shuffle the rows of the table by clicking on the "Shuffle" button.
Or sort by any of the columns using the down arrow next to any column heading.
If you know all the data on any row, you can temporarily remove it by tapping the trash can to the right of the row.
To hide a column, click on the column name.
To hide the entire table, click on the "Hide All" button.
You may also shuffle the rows of the table by clicking on the "Shuffle" button.
Or sort by any of the columns using the down arrow next to any column heading.
If you know all the data on any row, you can temporarily remove it by tapping the trash can to the right of the row.
Embed Code - If you would like this activity on your web page, copy the script below and paste it into your web page.
Normal Size Small Size show me how
Normal Size Small Size show me how
Created by:
SergioSanchez