Chapter 2 RQ's
Quiz yourself by thinking what should be in
each of the black spaces below before clicking
on it to display the answer.
Help!
|
|
||||
|---|---|---|---|---|---|
| When taking a computer apart, why is it important to not stack boards on top of each other? | you can scratch the line on the back of a board
🗑
|
||||
| Why is it important to remove loose jewelry before working inside a compute case? | it could get lodged in a fan and damage the item
🗑
|
||||
| When assembling a system, which do you install first, the drives or the motherboard? | drives
🗑
|
||||
| What is the purpose of raised screw holes or standoffs installed between the motherboard and case? | so the motherboard doesn't touch the case and so it scratch the trails/lines on the back of the motherboard
🗑
|
||||
| When installing the front panel wires to the motherboard front panel header, how do you know which pins to use for each wire if the pins on the header are not labeled? | look for a marking such as a small triangle and find pin 1 also counting the pins may help narrow things out
🗑
|
||||
| What are the two major components of a processor cooler assembly? | the heat sink is right above the cpu and the fan helps move the air flow through
🗑
|
||||
| How many pins does the CPU fan header on a current motherboard have? | 4-pin CPU fan header
🗑
|
||||
| If the power connector from the CPU fan has only three pins, it can still connect to the 4-pin header, but what functionality is lost? | the speed of the fan
🗑
|
||||
| How do you determine the wattage capacity needed by a power supply? | marked on the side of the power supply
🗑
|
||||
| Which one component in a high-end gaming computer is likely to draw the most power? | Video Card
🗑
|
Review the information in the table. When you are ready to quiz yourself you can hide individual columns or the entire table. Then you can click on the empty cells to reveal the answer. Try to recall what will be displayed before clicking the empty cell.
To hide a column, click on the column name.
To hide the entire table, click on the "Hide All" button.
You may also shuffle the rows of the table by clicking on the "Shuffle" button.
Or sort by any of the columns using the down arrow next to any column heading.
If you know all the data on any row, you can temporarily remove it by tapping the trash can to the right of the row.
To hide a column, click on the column name.
To hide the entire table, click on the "Hide All" button.
You may also shuffle the rows of the table by clicking on the "Shuffle" button.
Or sort by any of the columns using the down arrow next to any column heading.
If you know all the data on any row, you can temporarily remove it by tapping the trash can to the right of the row.
Embed Code - If you would like this activity on your web page, copy the script below and paste it into your web page.
Normal Size Small Size show me how
Normal Size Small Size show me how
Created by:
SergioSanchez