Understanding the Design and Function of AC Generators
Help!
|
|
||||
|---|---|---|---|---|---|
| 1. Another name for an AC generator is the ___ | alternator
🗑
|
||||
| 2. What is the primary difference between a simple DC generator and a simple AC generator | Dc uses a comutator
AC uses slip rings and brushes
🗑
|
||||
| 3. There are two basic types of altenator. These are the revolving ___ type and the revolving ___ type | Armature Field
🗑
|
||||
| 4. Slip rings, unlike the segmented commutator, are contructed as a ___ ring, with each end of the armature loop connected to a seperate ___ | continuous, ring
🗑
|
||||
| 5. In a 3-phase generator, the three sets of windings are placed ___ apart. | 120 degrees
🗑
|
||||
| 6. What limits the amount of power that can be generated with the revolving armature type of generator | brushes and slip rings.. page 234
🗑
|
||||
| 7.What is the advantae of using a rotating field and a stationary armature on commercial generators | design permits higher kva ratings because he output of circuit is connected to the stator. page 240
🗑
|
||||
| 8. The ___ is the rotating member of a generator or motor. | rotor
🗑
|
||||
| 9. When the armature is held stationary in a generator it is called the ___ | stator
🗑
|
||||
| 10. Two tpes of rotating field construction are the ___ rotor and the ___ rotor | salient pole, round rotor
🗑
|
||||
| 11. Pole faces that jut out and are ery pronounced are called ___ poles. | salient poles
🗑
|
||||
| 12. The ___ rotor uses a smooth, longer, and narrower construction to minimize wind resistance and centrifugal forces | round
🗑
|
||||
| 13. Exciters are made in a variety of ways including ___ and ___ | stationary, rotating
🗑
|
||||
| 14. A rotating exciter mounted on the same shaft as the main generator is usually called a ___exciter | brushless
🗑
|
||||
| 15. Alternators wiht small kVa ratings are usually ___ cooled | Air
🗑
|
||||
| 16. Air cooled alternator usually have a ___ attached to one end of the rotor to help circulate air. | fan
🗑
|
||||
| 17. Large-capacity generators are often enclosed in a ___ atmosphere for cooling purposes | hydrogen
🗑
|
||||
| 18. Which dissipates heat faster, hydrogen or air? | hydrogen
🗑
|
||||
| 19. What are the factors that determine the frequency of an alternator? | number of poles, speed of rotor
🗑
|
||||
| 20. What is the mathematical formula for determining the frequency of an alternator? | f = p * s/120
p= # of poles
z= speed RPM
🗑
|
||||
| 21. To generate 50 Hz with an 8-pole generator, the speed of rotation must be ___RPM | 750 RPM
🗑
|
||||
| 22. How many poles are required for a generator to hae a frequecy of 60 Hz at 1,200 RPM? | P = 6
60 = ( 1,200 * P / 120)
🗑
|
||||
| 23. A generator has four poles and a speed of 1,500 RPM. what is the output frequency? | 50 Hz
5- = (4 * 1,500) / 120
🗑
|
||||
| 24. What three factors determine the output voltage of an alternator? | length of conductors, speed of rotation, strength if magnetic field.
🗑
|
||||
| 25. How is the output voltage controlled? | increasing or decreasing strength of magnetic field.
🗑
|
||||
| 26. What three conditions must be met when connection two 3-phase alternators in parallel? | 1) ?
2) outputs must be same frequency
3) all output kVa must be same
🗑
|
||||
| 27. The most common method of detecting when the direction of the magnetic field of one alternator is matched with the phase rotation of a paralleled alternator is with the use of ___ | 3 lights
🗑
|
||||
| 28. Using the "Three Lamp" method, houw do yu know when the two alternators are in-phase with each other? | all the lights are out
🗑
|
||||
| 29. Another method of paralleling two alternator is with the use of a | synchroscope
🗑
|
Review the information in the table. When you are ready to quiz yourself you can hide individual columns or the entire table. Then you can click on the empty cells to reveal the answer. Try to recall what will be displayed before clicking the empty cell.
To hide a column, click on the column name.
To hide the entire table, click on the "Hide All" button.
You may also shuffle the rows of the table by clicking on the "Shuffle" button.
Or sort by any of the columns using the down arrow next to any column heading.
If you know all the data on any row, you can temporarily remove it by tapping the trash can to the right of the row.
To hide a column, click on the column name.
To hide the entire table, click on the "Hide All" button.
You may also shuffle the rows of the table by clicking on the "Shuffle" button.
Or sort by any of the columns using the down arrow next to any column heading.
If you know all the data on any row, you can temporarily remove it by tapping the trash can to the right of the row.
Embed Code - If you would like this activity on your web page, copy the script below and paste it into your web page.
Normal Size Small Size show me how
Normal Size Small Size show me how
Created by:
JoshHampton