Busy. Please wait.
Log in with Clever
or

show password
Forgot Password?

Don't have an account?  Sign up 
Sign up using Clever
or

Username is available taken
show password

Your email address is only used to allow you to reset your password. See our Privacy Policy and Terms of Service.


Already a StudyStack user? Log In

Reset Password
Enter the associated with your account, and we'll email you a link to reset your password.

test

Quiz yourself by thinking what should be in each of the black spaces below before clicking on it to display the answer.
        Help!  

Question
Answer
What does OSHA stand for   show
🗑
show Ask questions to get information  
🗑
When surveying a victim, what does the "B" in ABC stand for?   show
🗑
When does the NEC require the use of a GFCI   show
🗑
What ladder materials can be used around electricity   show
🗑
show 10'  
🗑
show falling Objects, Electrical Shock, Blow To The Head  
🗑
True Or false No fall protection device (harness) is required when the lifting device is equipped with an approved barrier surrounding the user   show
🗑
show Confine  
🗑
Who is responsible for providing the MSDS   show
🗑
show Baking Soda  
🗑
Cabling companies are dependent ___ for new and repeat business   show
🗑
Today's installer must a be highly skilled professional, a _________ member and _______ learner   show
🗑
Communication is ______% body language   show
🗑
Communication must be _____, clear, concise,_____, truthful, and free from unacceptable language.   show
🗑
Always find one _______ thing to say   show
🗑
What transmission method is able to transmit signals in either direction, but only in one direction at a time   show
🗑
The number of cycles a signal is repeated in a given time period is defined as the   show
🗑
show 5  
🗑
Express 14,000 MHZ in GHZ   show
🗑
An analog signal varies in what two aspects   show
🗑
show Modem  
🗑
The ratio of input power to output power is expressed in _______   show
🗑
How much of a change in db is required to double or half the power   show
🗑
show 1 mw  
🗑
show Bandwidth  
🗑
show 5 ohms  
🗑
In AC, the total opposition to current flow is called ________   show
🗑
show UTP and STP  
🗑
What type of cable is considered unbalanced   show
🗑
What is the name of the device used to interface between a balanced and unbalanced circuit   show
🗑
show Insulation  
🗑
What term best describes the difference in the propagation delay between a cables fastest and slowest pairs   show
🗑
show Specifications  
🗑
The HVAC information is found in the _______ drawings   show
🗑
show Site  
🗑
What 50 division document is used in the construction industry to standardize the format of specifications   show
🗑
What document is used to solicit for a quote and provides vendors with all the necessary information   show
🗑
How many backbone levels are allowed in a structured cabling system   show
🗑
show DEMARC  
🗑
Where do outside plant cables enter the building   show
🗑
What is the most economical permanent entrance over the life cycle of a building   show
🗑
show Aerial  
🗑
show 2  
🗑
show 5 m 16.5 ft  
🗑
What is the maximum length for a horizontal optical fiber cable   show
🗑
What item does a consolidation point (CP) provide   show
🗑
What color termination field identifies "common equipment"   show
🗑
Which of the following pathways has the thinnest wall thickness and uses fittings that are threaded onto it   show
🗑
Flexible metallic conduit in NOT recommended because it tends to _____   show
🗑
Limit installation of flexible metal conduit to ______   show
🗑
show 35 mm (1 1/4 trade size)  
🗑
show 300 mm (12 in) 6 x the diameter for conduit up to 2 in, over 2 in 10 x the diameter  
🗑
show False  
🗑
show 3 (30 ft apart allows for 1 more bend)  
🗑
When installing optical fiber, consider placing 3 innerducts in a 103 mm (4 trade size conduit)in the following sizes   show
🗑
Installed open top cable supports (J hooks)should be installed to provide a minimum of _____ clearance above ceilings   show
🗑
show ANSI Standard 607-A, NEC articles 250, 800  
🗑
What is the minimum recommended AWG for a GE ground equalizer   show
🗑
Secondary protectors are installed to handle   show
🗑
show 10 AWG  
🗑
show 100 MHz  
🗑
show Black - Orange  
🗑
show Binder red -blue, pair violet - blue  
🗑
True or False 8P8C patch cords shall be stranded construction   show
🗑
Stranded patch cords typically have ______ loss compared to horizontal cables   show
🗑
Undercarpet cable is ________   show
🗑
What is the characteristic impedance of screened/shielded cables   show
🗑
show 75 ohms  
🗑
A connectors ability to survive hundreds on insertion and withdrawal cycles is calculated as _______   show
🗑
show 8P8C, 8 position, 8 contact  
🗑
True or False a RJ-11 is an 8P8C pinout   show
🗑
What color wires are on pins 4 and 5 of a T568A connector   show
🗑
What type of connector is used to terminate Series-6   show
🗑
The maximum pulling tension for three, 4-pair UTP cables during installation is ______   show
🗑
The minimum bend radius for a 4-pair UTP horizontal cable, 6.3 mm (.25 in), is ______   show
🗑
What can be used to minimize cable twisting and wrapping around themselves during a pull   show
🗑
What can be used to pull or support a cable in the middle (not from it's end)   show
🗑
show conduit  
🗑
When pulling in a ceiling around a sharp corner, what must be done   show
🗑
When TRs are stacked, they are typically connected with _______   show
🗑
show False (only use with appropriate hook, ring, or clamp) burs on Red iron damage cable)  
🗑
The most common principle in fire stopping is ________   show
🗑
show Listed  
🗑
show T  
🗑
show True  
🗑
What property allows a firestop to develop a hard char and become rigid when exposed to heat   show
🗑
show Fire Watch  
🗑
show Combination  
🗑
What is the recommended method of balanced twisted-pair terminations   show
🗑
show 45 mm (1.75 in)  
🗑
What color conductors are on pins 1 and 2 on a T568B jack   show
🗑
What pair-count are BIX hardware frames available in   show
🗑
What pair-count are 110 hardware frames available in   show
🗑
show STP  
🗑
show 75 mm (3 in)  
🗑
The first step in testing copper cable involves _______   show
🗑
show ANSI/TIA/EIA-568-C  
🗑
show Termination in the TR/TE, Horizontal cable, Work area connector (Rack to Jack)  
🗑
show 90 m (295 ft)  
🗑
show 100 m (328 ft) (Permanent link plus patch cords max 5 m each end)  
🗑
show Delay Skew  
🗑
show The tester's NVP calibration  
🗑
show High temperature, Wrong category of cable, Improper terminations  
🗑
What causes excessive NEXT   show
🗑
show Impedance mismatch in patch cords, Improper termination practices, Substandard components  
🗑
show wiremap 1,2 to 3,6 and 3,6 to 1,2  
🗑
show Licensed Fire Protection Engineer  
🗑
show Coaxial Cable or Fiber Optic Cable  
🗑
show Panel Antenna  
🗑
show directional  
🗑
When connection external antennas to Access Points (AP), which type of connector is not used   show
🗑
True or false Radiating cable for Distributed Antenna Systems (DAS) can be laid directly in a cable tray   show
🗑
For a 24 VDC distributed amplifier system, how many pairs are required   show
🗑
show 80-94  
🗑
show 18:00  
🗑
show 1.37 km 4500 ft  
🗑
show 366 m (1201 ft)  
🗑
Which is a horizontal media approved for Building Automation Systems (BAS)   show
🗑
show The stability of the access floor system  
🗑
True or False The entrance room (ER) shall be located outside of the computer room   show
🗑
What is the equivalent term used by the international (ISO/IEC 24764) data center standard to describe a BICSI Data center standard 002 Consolidation point in the Zone Distribution Area (ZDA)   show
🗑
show MDA  
🗑
show Intermediate distribution area (IDA)  
🗑
show True  
🗑
Draft ANSI/TIA-942-A recommends cabling with a _______ frequency characterization for Horizontal and Backbone cabling   show
🗑
show 3500, 500  
🗑
show Draft ANSI/TIA-942-A and CENELEC EN 50173-5  
🗑
The depth of cables in pathways for data centers shall not exceed______   show
🗑
show Filling gaps in a row of cabinets Installing blanking panels in the populated cabinets Vertical cable managers Side panels  
🗑
show 40 percent  
🗑
show Hard line 12.7 mm 1/2 inch coax Optical Fiber Cable Series-11 coax  
🗑
show True  
🗑
show Elevator Controls (cab calls and override) Integration with infant protection, wandering patient, and elopement systems Card readers not always being located at the door Multiple levels of access control for care providers, visitors and security  
🗑
show  
🗑


   

Review the information in the table. When you are ready to quiz yourself you can hide individual columns or the entire table. Then you can click on the empty cells to reveal the answer. Try to recall what will be displayed before clicking the empty cell.
 
To hide a column, click on the column name.
 
To hide the entire table, click on the "Hide All" button.
 
You may also shuffle the rows of the table by clicking on the "Shuffle" button.
 
Or sort by any of the columns using the down arrow next to any column heading.
If you know all the data on any row, you can temporarily remove it by tapping the trash can to the right of the row.

 
Embed Code - If you would like this activity on your web page, copy the script below and paste it into your web page.

  Normal Size     Small Size show me how
Created by: r19SSIKi