Science Test for 5th Word Scramble
|
Embed Code - If you would like this activity on your web page, copy the script below and paste it into your web page.
Normal Size Small Size show me how
Normal Size Small Size show me how
Question | Answer |
SF/SM down has how many supporting ropes? | 2 |
SF/SM down is how many times easier to lift the load? | 2 |
SF/SM up has how many supporting ropes? | 3 |
SF/SM up is how many times easier to lift? | 3 |
Diagram-a _______ that describes the ________ of all the parts of a system | drawing realationship |
A ________ uses a system of symbols and conventions to communicate information about lever design | diagram |
Class 1 levers have the ____ in the middle and the load and effort at the ends. | fulcrum |
Class 2 levers have the _____ in the middle and the fulcrum and the effort at the ends. | load |
Class 3 levers have the _____ in the middle and the fulcrum and the load at the ends. | effort |
Levers can be set up in _ basic ways. Class 1 Class 2 Class 3 | 3 |
The F,L, and E stand for the part of the lever system that is in the _________ of the lever. | middle |
When using the spring scale to measure effort needed with the lever, you must add _____________ to your reading, because the ____ of the spring scale is already exerting 0.5 newtons on the lever. | 0.5 newtons weight |
The _______ needeed to lift the load decreases as the load gets _______ to the fulcrum: the effort ________ as the load gets farther from the _________. | effort, closer, increases,fulcrum |
Two- coordinate graphs show ___________ between two variables and can be used to make ____________ | relationships, predictions |
Advantage is a __________ obtained by using a lever (or other simple machine.) | benefit |
The __________ the effort is from the fulcrum, the easier it is to lift the load. | farther |
The ______ of the load remains the ____, but the effort needed to lift it varies depending on ______ the effort is applieid on the lever arm | weight, same, where |
A lever can make load ______ to lift, it can ___ loads, and it _______ the effort | easier, move, reduces |
In a lever system the farther from the ______ the effort is applied, the _______ the advantage is to the lever user. | fulcrum, greater |
Effort- the _______ needed to move a ____ or overcome a __________. | force, load, resistance |
Effort is measured in ________. (N) | newtons |
Lever- a _____ __________ that people use to gain a _________ ___________, such as making work _______. | simple machine, mechanical advantage, easier |
lever arm- a stick or beam free to ________ at a point. | pivot |
___________- the point where the lever arm pivots | fulcrum |
load- the _____ lifted or the __________ overcome by a lever. | mass, resistance |
Single fixed has how many supporting ropes? | 1 |
Single fixed is how many times easier to lift? | 1 |
Single movable has how many supporting ropes? | 2 |
Single movable is how many times easier to lift? | 2 |
A pulley is a wheel with a grooved rim in which a rope can run to change the _______ of the pull (force) that lifts a load | direction |
A fixed pulley has a wheel that is attached to something _______. | above the load |
A movable pulley has a wheel that is attached to __________. | the load |
Mechanical advantage reduces the _____ (force) needed to lift a load or overcome a resistance' it results from using a simple machine | effort |
Directional advantage is a change in _________ that results from passing a rope through a pulley | direction |
A single pulley can be set up as a ___________ pulley or a __________ pulley to lift a load. | fixed, movable |
Single fixed pulley changes the __________ of the effort | direction |
Single movable pulley reduces the _______ need to lift the load | effort |
Simple machine- any of the ___ basic devices that provide ___________ or other advantage, such as pulleys and levers | six,mechanical |
two pulleys can provide greater ______________ advantage than one when lifting loads | mechanical |
what are the six basic machines? | lever, pulley, wheel and axel, inclined plane, wedge, screw |
The benefits gained by using simple machines are always balanced by ________. When the benefits outweigh the cost, the machine is a __________ tool. | costs, useful |
In a lever system and a pulley system, a reduction in effort is balanced by the __________ over which the effort must act. | distance |
**Work= Force x ________** | Distance |
Work is measured in_______. (J) | Joules |
Created by:
dkt101
Popular Science sets