General Safety Word Scramble
|
Embed Code - If you would like this activity on your web page, copy the script below and paste it into your web page.
Normal Size Small Size show me how
Normal Size Small Size show me how
Question | Answer |
first | In all wood working operations, be sure to consider safety______. |
instructor | Your ________ must be present at all times when working in the shop. |
required | Some form of eye protection is ________ when working on any machine or when ever eye hazards exist. |
NOT | Shouting, yelling, and horseplay are ___ allowed in the shop. |
reported | All accidents in the shop must be ________ to your instructor. |
break | Your lumber must be clean, new material that is free of nails, rocks, concrete, or other junk that may damage or _____ the tools. |
fire | Do not hang clothes or other items from the ____ extinguisher. |
brush | When cleaning off the bench tops, use a _____ to remove dust and shaving; do not use your hands - you may pick up splinters. |
trip | Keep the floors, aisles, and passageways clear so that people do not ____ or fall over the cords, lumber, or tools. |
hands | Be sure to dry your _____ before touching any electrical cords, tools, or receptacles. |
clean | If you spill oil, water, or any other liquid on the floor, ______ it up immediately. |
feet | Sandals may not be worn in the shop because of potential injuries to your _____. |
away | When working with sharp edged tools like chisels, be sure to keep your hands clear of the cutting edge and cut ____ from your body. |
removed | Long sleeves, loose clothing, and loose jewelry must be _______ when operating any machine. |
up or back | Long hair must be tied ________ to keep it from getting caught in turning parts of the machine. |
permission | All students must have ___________ to operate any machine. |
ALL | Keep the machinery guards in position at ____ times. |
operating | Don’t talk or distract a student while he/she is ________ a machine. |
allowed | Only the teacher and a student operator are ________ within the working area around a machine. |
job/ task | Always give full attention to the _______ that you are doing. |
stop | Make sure that your machine comes to a full and complete _____ before cleaning or making any adjustments to the machine. |
approval | Any special set-ups or special cuts on a saw must have the ________ of your instructor. |
stop | If your machine is making irregular noises or does not seem to be operating normally, immediately _____ the machine and notify your instructor. |
stop | Wait for the machine to come to a complete _____ before walking away. |
required | When working with round or irregularly shaped materials, special jigs will be __________ ,as well as the approval of your instructor. |
eye | Whenever there is a chance of flying particles, the student must wear safety glasses, goggles, or some other form of ____ protection. |
person | Compressed air can be dangerous. Do not point the air nozzle at another ______ or hold it directly against the skin. |
spontaneous | Oily rags can burst into flames due to ___________ combustion and therefore must be disposed if in a special can located in the finishing room. |
stop | When in doubt about any woodworking operation, _____ your machine and ask your instructor for assistance. |
others | Students must develop good safety habits, because they are for your protection and the protection of ______. |
Created by:
Room224
Popular Miscellaneous sets