Developing the Image
Help!
|
|
||||
---|---|---|---|---|---|
What is the stage of preocessing that converts the latent image to the manifest image? | Developing
🗑
|
||||
At what stage does the process of removing the unexposed and underdeveloped silver halide from the emilsion occur? | Fixer
🗑
|
||||
What is the component of the developer solution responsible for the gray areas on the image? | Phenidone
🗑
|
||||
While in the develiper solution additional electrons are added to the | sensitivity specks
🗑
|
||||
In the developer solution exposed silver halide crystals are reduced to | metallic silver
🗑
|
||||
the developer solution requires a(n)___enviorment | alkaline
🗑
|
||||
Stopping the development process takes place during | Fixing
🗑
|
||||
Boxes of unopended film should be stored : (2) | Veritcally and at 50-70 degree F
🗑
|
||||
The concept of routinley using film that has been stored the longest is known as | FIFO
🗑
|
||||
Darkrooms should be protected from (3) | Chemical exposure, heat, ionizing radiation
🗑
|
||||
Silver recovery is the removal of silver halide from the | fixer solution
🗑
|
||||
When the developer chemicals become increasingly inactive due to exposure to air and usage they are said to be | exhausted
🗑
|
||||
the process of replacing processing chemicals with fresh chemicals is known as | replenishment
🗑
|
||||
Developer tem,p should be kept at approxx | 93-95 F
🗑
|
||||
Sensitomentric monitoring of automatic processores should be done | daily
🗑
|
||||
a safeligh fog quiality conrol test should be performed | quarterly
🗑
|
||||
if films begin to fade adter being in storage for a long time there might be a prob with which stage of the processing cycle | washing
🗑
|
||||
what removed excess moisture from the film prior to its entrance into the dryer | squeegee roller
🗑
|
||||
which rack system guides the film from one tank to the next | crossover rack
🗑
|
||||
which system best achieves agitation continuous mixing and filtration of process solutions | recirculation system
🗑
|
||||
if the developed temp is too high the processed image will appear | dark
🗑
|
||||
benging or inking of the film will result in a | half moon artifact
🗑
|
||||
whihc of the following is a minus density artifact not due to processing chemicals | fingerprints
🗑
|
||||
a ____ is connected to the entrance roller assembly and activated the replenishment pumps | microswitch
🗑
|
||||
Which of the processing tanks have the greated volume? | Developer
🗑
|
Review the information in the table. When you are ready to quiz yourself you can hide individual columns or the entire table. Then you can click on the empty cells to reveal the answer. Try to recall what will be displayed before clicking the empty cell.
To hide a column, click on the column name.
To hide the entire table, click on the "Hide All" button.
You may also shuffle the rows of the table by clicking on the "Shuffle" button.
Or sort by any of the columns using the down arrow next to any column heading.
If you know all the data on any row, you can temporarily remove it by tapping the trash can to the right of the row.
To hide a column, click on the column name.
To hide the entire table, click on the "Hide All" button.
You may also shuffle the rows of the table by clicking on the "Shuffle" button.
Or sort by any of the columns using the down arrow next to any column heading.
If you know all the data on any row, you can temporarily remove it by tapping the trash can to the right of the row.
Embed Code - If you would like this activity on your web page, copy the script below and paste it into your web page.
Normal Size Small Size show me how
Normal Size Small Size show me how
Created by:
rachelbeatty4
Popular Science sets