Question | Answer |
Always wear eye_____________. | Protection. |
Use equipment with the instructor’s
____________. | Permission. |
Use equipment only when the _________ is in
the lab. | Instructor/Teacher. |
________all accidents or injuries | Avoid. |
Do not use__________________ equipment. | Broken. |
Never use equipment until you have been
properly___________ in its use. | Trained |
Loose clothing can cause_______. | Injuries. |
Long hair must be ___________ or covered
• with a cap | Tied back. |
No __________ should be worn in the lab. | Jewelry, Watches, Rings,etc. |
Never wear gloves except when handling
_______lumber. | Rough |
Wear_____________ shoes or boots. | Closed-toed. |
Approved protection earmuffs should be worn
around________ equipment | Noisy. |
A__________must be worn when working
where there is dust. | Dust mask. |
Finishing materials should only be used in well
_________ areas. | Ventilated. |
Always_________spilled materials. | Clean up. |
Used rags are to be kept in a covered
______container. | Metal. |
Locate the _______________ and learn how
to use them. | Fire Extinguisher. |
Keep cabinet doors and drawers _______. | Closed. |
Never leave anything on the _________ that
could be slipped on or tripped over. | Floor. |
____vises when they are not in use | Close. |
Workbenches should be kept__________and
organized. | Clear. |
Use a_______or a rag to clear away scraps
and sawdust. | Brush. |
Tools should be used only for what they are
___________. | Designed for. |
_____tools should be carried with the edge
or point held down toward the floor. | Sharp. |
A tool should always be held by the_______. | Handle. |
When you are finished with a tool return it to
its__________________. | Proper location. |
Ask for_________when you need to handle
large or heavy material. | Help. |
Lift with your______ not with your back. | Legs. |
Never handle __________equipment if your
hands are wet or if you are standing on a wet
floor. | Electrical. |
Equipment with a ___________________
power cord should be reported to the instructor. It
should not be used. | Frayed. |
Don’t yank on the power cord to disconnect a
tool. Pull the________. | Plug. |
Use all the recommended _______and other
safety devices when you operate power
equipment. | Guards. |
Always disconnect the power equipment
before you make any major_____________. | Adjustment. |
Never adjust equipment while it is _______. | Running. |
When you turn off a machine, stay with it
until it is _____________stopped. | Completely. |
Before you use a machine, make sure the
person who used it before you, has turned it off
and it is completely _________. | Stopped. |
Don’t__________anyone while they are
operating the equipment. | Distract. |
Using tools and equipment requires your
complete __________at all times. | Attention |
Always work at a _____speed. | Safe. |
Never fool around or _____in the lab. | Play. |