Question | Answer |
first | In all wood working operations, be sure to consider safety______. |
instructor | Your ________ must be present at all times when working in the shop. |
required | Some form of eye protection is ________ when working on any machine or when ever eye hazards exist. |
NOT | Shouting, yelling, and horseplay are ___ allowed in the shop. |
reported | All accidents in the shop must be ________ to your instructor. |
break | Your lumber must be clean, new material that is free of nails, rocks, concrete, or other junk that may damage or _____ the tools. |
fire | Do not hang clothes or other items from the ____ extinguisher. |
brush | When cleaning off the bench tops, use a _____ to remove dust and shaving; do not use your hands - you may pick up splinters. |
trip | Keep the floors, aisles, and passageways clear so that people do not ____ or fall over the cords, lumber, or tools. |
hands | Be sure to dry your _____ before touching any electrical cords, tools, or receptacles. |
clean | If you spill oil, water, or any other liquid on the floor, ______ it up immediately. |
feet | Sandals may not be worn in the shop because of potential injuries to your _____. |
away | When working with sharp edged tools like chisels, be sure to keep your hands clear of the cutting edge and cut ____ from your body. |
removed | Long sleeves, loose clothing, and loose jewelry must be _______ when operating any machine. |
up or back | Long hair must be tied ________ to keep it from getting caught in turning parts of the machine. |
permission | All students must have ___________ to operate any machine. |
ALL | Keep the machinery guards in position at ____ times. |
operating | Don’t talk or distract a student while he/she is ________ a machine. |
allowed | Only the teacher and a student operator are ________ within the working area around a machine. |
job/ task | Always give full attention to the _______ that you are doing. |
stop | Make sure that your machine comes to a full and complete _____ before cleaning or making any adjustments to the machine. |
approval | Any special set-ups or special cuts on a saw must have the ________ of your instructor. |
stop | If your machine is making irregular noises or does not seem to be operating normally, immediately _____ the machine and notify your instructor. |
stop | Wait for the machine to come to a complete _____ before walking away. |
required | When working with round or irregularly shaped materials, special jigs will be __________ ,as well as the approval of your instructor. |
eye | Whenever there is a chance of flying particles, the student must wear safety glasses, goggles, or some other form of ____ protection. |
person | Compressed air can be dangerous. Do not point the air nozzle at another ______ or hold it directly against the skin. |
spontaneous | Oily rags can burst into flames due to ___________ combustion and therefore must be disposed if in a special can located in the finishing room. |
stop | When in doubt about any woodworking operation, _____ your machine and ask your instructor for assistance. |
others | Students must develop good safety habits, because they are for your protection and the protection of ______. |