Question | Answer |
What chooses input source? | Mic/Line select switch |
Name 2 ACTIVE VOLUME controls. | Mic Pre-Amp and Line Trim |
The mic pre-amp may boost the signal by how much? | 60 - 65 dB |
What drops the mic input pre-amp level? | Pad |
What is +48 Volts phantom power used for? | Condenser mics & active direct boxes |
How much does the Phase Reversal Switch change polarity by? | 180 degrees |
The mic pre-amp brings mic level up to what? | Line level |
A Line Trim may boost or cut by how much? | +/- 10dB |
A drum machine or keyboard input is what level? | Line |
A Multi-track recorder return is a what? | Line input |
Name a PASSIVE TONE control. | Filter |
A High Pass Filter cuts what? | Low frequencies |
Name an ACTIVE TONE control. | EQ |
What allows you to selectively emphasize or de-emphasize frequency areas? | EQ |
An Input Fader is a what? | PASSIVE Voume Control |
A fader controlling signals going to the Bussing Network is called what? | an Input Fader |
The Bussing Network is an ...? | ACTIVE Combining Network |
Sub-master Faders are ...? | PASSIVE Volume Controls |
Sub-Master Faders control signals coming from the ...? | Bussing Network |
Which faders control signals going to the main Stereo Buss? | Monitor Faders |
A Monitor Fader is a ...? | PASSIVE Volume Control |
Name the PASSIVE Voume Control that control signals coming from the Stereo Buss. | Master Faders |
What are two main uses for auxiliary sends? | Headphone (cue) mix and effects sends |
Auxiliary sends used for effects are usually sent how? | Post-Fader |
Auxiliary sends used for cue mixes are usually sent how? | Pre-Fader |
This is used to monitor just one channel. | Solo |
The Mute switch cuts the signal just after the ...? | Fader |
Unity gain is the position at which ...? | Input = Output |