click below
click below
Normal Size Small Size show me how
Airworthiness
Airworthiness Review Board
Question | Answer |
---|---|
The Inspection AR’s signature must be in permanent ink on which FAA forms: | "Form 8100-2, Standard Airworthiness Certificate Form 8130-7, Special Airworthiness Certificate Form 8130-6, Application for Airworthiness Certificate" |
Typing errors may not be corrected on the following form: | Standard or special airworthiness Certificates |
Where would you find the detailed instructions for completion of FAA Form 8130-3, Airworthiness Approval Tag? | FAA Order 8130.21 |
Is it appropriate for an Inspection AR to sign and issue an FAA Form 8130-3 tag, if the form is incomplete with regard to part quantity, nomenclature, part number, installation eligibility, or shipper’s invoice number? | No |
Entries on the FAA Form 8130-3 tag may be made in pencil. | False |
Is it permissible to issue one FAA Form 8130-3 tag for several parts of the same number? | Yes |
Which advisory circular contains export airworthiness special requirements? | AC 21-2 |
Which FAA document contains information concerning the completion of FAA Form 8130-1, Application for Export Certificate of Airworthiness? | Order 8130.2 |
There are no specific size requirements for PMA markings, provided they are legible. | True |
Deviations to FAA policy must be______________________. | In writing |
Prior to appointment of a new designee, a determination that a need exists must be made by the _______________. | FAA |
The Federal Aviation Regulation that speaks specifically to the duration of a designee’s authority is___________. | 14 CFR 183.15 |
By signing the acknowledgement of responsibility, the designee is acknowledging that ____________. | Delegation is a privilege, not a right. |
ODA appointments may be issued with a duration of up to ______ years, at the discretion of the Organizational Management Team (OMT)? | 5 |
Where are the function codes for Flight Standards Service appointed DARs (DAR-T) found in FAA Order 8100.8? | Chapter 15 |
FAA Order 8130.20 provides guidance to designees regarding ________. | Aircraft registration requirements |
Maintenance Designees are limited to issuing what type of certifications? | Recurrent |
A standard airworthiness certificate will remain effective as long as the aircraft is registered in the U.S. and __________. | Aircraft has a current inspection. |
Prior to accepting an application for airworthiness certificate, you must verify what? | Verify the aircraft is registered to the applicant. |
FAA policy describing procedures for issuing original/recurrent standard airworthiness certifications is located in what document? | FAA Order 8130.2 |
Which paragraph of FAA Order 8100.8 covers the manufacturing designee's responsibility to safeguard FAA Form 8100-2, Standard Airworthiness Certificate? | 301 |
If the aircraft does NOT meet requirements for standard airworthiness certification, you must write a letter to the applicant stating the reason(s) for the denial and ___________. | Forward the application and a copy of the denial letter to your FAA managing office. |
When issuing a standard airworthiness certificate, what document is used to determine if the aircraft is eligible by category? | Type Certificate Data Sheet (TCDS) |
Which appendix of FAA Order 8130.2 deals with issuing standard airworthiness certificates for new aircraft manufactured outside the United States? | A |
When you deny a special airworthiness certificate, you must _____________. | Write a denial letter explaining the reasons for denial of the certificate. |
What FAA Airworthiness Form is used for all original and recurrent certifications of aircraft in the special classification? | 8130-7 |
Special airworthiness certificates for primary, restricted, light sport, and limited category aircraft are effective for what duration? | Unlimited provided the aircraft is maintained in accordance with 14 CFR, Parts 43 and 91 |
To be considered airworthy, an aircraft being certificated in the experimental category must _________. | Be in a condition for safe operation. |
14 CFR, Part 45 requires a fireproof ID plate on all of the following experimental aircraft, except? | Exhibition |
Nationality and registration marks must be ____. | Painted on the aircraft or affixed by any other means of permanence. |
When amending a special airworthiness certificate (FAA Form 8130-7), operating limitations that were issued based on a previous edition of this order may be substituted for ______. | The current limitation as found in FAA Order 8130.2 |
Which order gives current FAA policy regarding the issuance of replacement and amended airworthiness certificates? | FAA Order 8130.2 |
What do you put in the Date block on a standard or special replacement airworthiness certificate? | An R followed by the original issue date. |
An aircraft is NOT eligible for a replacement airworthiness certificate when ________. | The original certificate has expired or been suspended or revoked. |
What is entered in the Date block of a standard or special amended airworthiness certificate? | An A followed by the current date of issue. |
True or False: Before issuing an amended airworthiness certificate for an aircraft model change, you must submit FAA form 337(s) to AFS-750 | False |
What documents must you include in the file to be forwarded to AFS-750 for issuance of a replacement airworthiness certificate? | "A copy of the replacement operating limitations issued. A signed statement from the aircraft owner requesting a replacement. A copy of the replacement certificate issued" |
When replacing a lost special airworthiness certificate (FAA Form 8130-7), what operating limitations are issued? | The exact limitations that were part of the lost certificate |
Can an IAR issue a special flight permit other than in person? | No |
Procedures for issuing a special flight permit are located in which FAA Order? | 8130.2 |
Special flight permit operating limitations are necessary to establish ___________. | Safe operation |
Before the designee issues a special flight permit for large aircraft to which 14 CFR, Part 125 does not apply, the applicant must _____. | Select, identify, and use an approved inspection program specified in 14 CFR, Part 91.409 |
Use the Internet to answer the following question: According to FAA Order 8130.2, what section of Title 14 CFR authorizes the issuance of a special flight permit when no restrictions are identified in the text of an airworthiness directive? | Section 39.23 |
Without exception, who is required to inspect an aircraft prior to issuance of a special flight permit? | Designee |
In accordance with 14 CFR, Part 91.203, what must be displayed in an aircraft operating on a special flight permit? | FAA Form 8130-7 and attached operating limitations. |
An applicant for a special flight permit must submit an application in accordance with 14 CFR, Part 21.199 on what FAA form? | 8130-6 |
The special requirements of importing countries are found in what document? | AC 21-2, Appendix 2 |
Who may apply for an export airworthiness approval? | Any Person |
After the issuance of Form 8130-4, the ASI or designee must complete part _____ of Form 8130-1. | Part III - Approval |
What form may have corrections and erasures and may be reused for export purposes? | AC 8050-72, Export Number Assignment Card (E-Card) |
According to 14 CFR, Part 21.1, a "product" includes all of the following except | Articles |
An export airworthiness approval for an aircraft is issued in the form of an Export Certificate of Airworthiness. That Export Certificate of Airworthiness does not authorize what? | Operation of the Aircraft |
What FAA document would you use to find the function code authorizing a designee to issue Export Certificates of Airworthiness for aircraft? | 8100.8 |
Where would you look to find the definition of "Original" vs "Recurrent" airworthiness certifications? | 8130.2 |
Where would you find instructions for processing a completed airworthiness file? | The Gulfstream ODA Operations Manual (and Order 8130.2) |
What Order defines the process used to hold an airworthiness certificate in suspense? | 8130.2 |
What information should be entered in FAA form 8130-6 Section III B (Airworthiness Directives) | The number and the date range listed on the cover of the latest Biweekly AD Supplement. For example, “2014-09, 04/21/2014-05/04/2014.” |