click below
click below
Normal Size Small Size show me how
Drill Press Test
Test on Nov 8
Question | Answer |
---|---|
1. (Knowledge) | Operate only with instructor’s permission and after you have received instruction. |
2.(Knowledge) | Remove dangling jewelry, eliminate loose clothing and confine long hair. |
3.(Knowledge) | Always use proper eye protection. |
4.(Knowledge) | Hold material securely with vice, clamps or your hand |
5.(Knowledge) | The long end of the material should extend to the left of the operator. |
6.(Knowledge) | Make sure the key is removed from the chuck. |
7.(Knowledge) | Clean up waste with a chip brush. |
8.(Knowledge) | Turn off power if the material is caught in the drill |
1. (Operations) | Stand in front of the tool |
2.(Operations) | Secure material on the table |
3.(Operations) | Center material under the drill bit |
4.(Operations) | Hold the material firmly with your LEFT hand |
5.(Operations) | Turn the machine ON |
6.(Operations) | Do NOT drill into the vice |
7.(Operations) | Grasp the feed handle by the top knob with your RIGHT hand |
8.(Operations) | Turn the feed handle until the depth stop engages |
9.(Operations) | Slowly reverse the feed handle motion until the drill bit returns the start position |
10.(Operations) | Turn the machine OFF |
11.(Operations) | Clean off all waste with a chip brush |