Save
Busy. Please wait.
Log in with Clever
or
show password
Forgot Password?
Don't have an account?  Sign up 
Sign up using Clever
or
Username is available taken
show password


Make sure to remember your password. If you forget it there is no way for StudyStack to send you a reset link. You would need to create a new account. Your email address is only used to allow you to reset your password. See our Privacy Policy and Terms of Service.

Already a StudyStack user? Log In

Reset Password
Enter the associated with your account, and we'll email you a link to reset your password.
focusNode
Didn't know it?
click below
 
Knew it?
click below
Don't Know
Remaining cards (0)
Know
0:00
edit
Embed Code - If you would like this activity on your web page, copy the script below and paste it into your web page.

  Normal Size     Small Size show me how

AutoCAD Definitions

Definition of Key Terms

TermDefinition
Polar Array Located in the modify ribbon, the user selects an object and a base point to allow the selected objects and/or line segments to be copied around the center axis, you would enter how many items you wish to array after selecting the base point.
Radius Dimension Located in the annotation ribbon, this command is used to display the size of a circle or an arc.
Ortho Mode Highlighted lines or objects are selected at a basepoint which would allow the user to change the angle or degree of the selected items.
Rotate One of the most basic commands in AutoCAD, located in the draw ribbon, allows the user to select a start point and an end point within the drawing and create one singular segment of a drawing.
Erase Located in the modify ribbon, this command allows the user to remove objects or lines from the drawing.
Copy Located in the modify ribbon, allows you to select and replicate line segments or objects and place them repeatedly.
Move Highlighted lines or objects are selected at a basepoint and can be dragged across the drawing and placed at a desired location.
Hatch Under the draw ribbon, this command fills in a highlighted section of a drawing with a selected pattern or color.
Trim Located in the modify ribbon, allows the user to select the cutting edges on multiple lines, so the user can eliminate excess lines in a desired selected area.
Line Located on the lower model ribbon, When turned on, the user limits the cursor to vertical and horizontal movements on the drawing to ensure line segments are completely straight.
Created by: MasonGarfinkel
Popular Engineering sets

 

 



Voices

Use these flashcards to help memorize information. Look at the large card and try to recall what is on the other side. Then click the card to flip it. If you knew the answer, click the green Know box. Otherwise, click the red Don't know box.

When you've placed seven or more cards in the Don't know box, click "retry" to try those cards again.

If you've accidentally put the card in the wrong box, just click on the card to take it out of the box.

You can also use your keyboard to move the cards as follows:

If you are logged in to your account, this website will remember which cards you know and don't know so that they are in the same box the next time you log in.

When you need a break, try one of the other activities listed below the flashcards like Matching, Snowman, or Hungry Bug. Although it may feel like you're playing a game, your brain is still making more connections with the information to help you out.

To see how well you know the information, try the Quiz or Test activity.

Pass complete!
"Know" box contains:
Time elapsed:
Retries:
restart all cards