click below
click below
Normal Size Small Size show me how
ASA Study Unit 10
Publications, Privelages, and Human Factors
Question | Answer |
---|---|
Suitability for use of a specific prop with a particular engine/airplane combo can be found where? | Aircraft Specs or Aircraft TCDS |
Normal op speed: 260 kts Never exceed speed: 293 kts Max landing gear op speed: 174 kts Max flap extended speed: 139 The high end of the white arc on the airspeed instrument would be at? | 139 kts |
The issuance of an Airworthiness Certificate is governed by? | 14 CFR Part 21 |
1) FARs require approval after compliance with data of a STC 2) An installation of an item made IAW the TSO system requires no approval for installation. Which, if any, are true? | Only #1 |
What is the max duration of a temporary airman certificate? | 120 days |
The three types of human error are | omission, commission, and extraneous |
FAA certified mechanics may: A) approve a major repair for return to service B) approve a minor alteration for return to service C) supervise and approve a 100-hour inspection | B |
Placards required on an aircraft are specified in? | Aircraft Specs or TCDS |
Actions required by an AD may come as what form? 1. Inspection 2. Part(s) replacement 3. Design modification 4. Change in op procedures 5. Overall change in the content, form and disposition of A/C records | 1, 2, 3, and/or 4 |
A person working under the supervision of a certified mechanic with an A&P ratinf is not authorized to perform... | a 100-hour inspection |
Which is true? 1. Props are NOT included in the AD system 2. A certified P mechanic may make a minor repair on an aluminum prop and approve for return to service. | Only #2 |
Many areas of aviation have shifted their focus from eliminating error to | preventing and managing error |
1. A STC may be issued to more than one applicant for the same design change, providing each shows compliance with the applicable requirement 2. An installation of an item manufactured IAW the TSO system requires no further approval for installation | Only #1 |
An AD requires that a propeller be altered. Certified mechanics could | perform and approve the work for return to service if it is a minor alteration |
What is the definition of "maintenance"? | Overhaul, repair, parts replacement, inspection, and preservation |
Which regulation provides info regarding instrument range markings for an airplane certified in the normal category? | 14 CFR Part 23 |