Save
Busy. Please wait.
Log in with Clever
or
show password
Forgot Password?
Don't have an account?  Sign up 
Sign up using Clever
or
Username is available taken
show password


Make sure to remember your password. If you forget it there is no way for StudyStack to send you a reset link. You would need to create a new account. Your email address is only used to allow you to reset your password. See our Privacy Policy and Terms of Service.

Already a StudyStack user? Log In

Reset Password
Enter the associated with your account, and we'll email you a link to reset your password.
focusNode
Didn't know it?
click below
 
Knew it?
click below
Don't Know
Remaining cards (0)
Know
0:00
edit
Embed Code - If you would like this activity on your web page, copy the script below and paste it into your web page.

  Normal Size     Small Size show me how

General

AIRCRAFT DRAWINGS

QuestionAnswer
What is meant by tolerance on an aircraft drawing? The allowable plus or minus variation from the dimension given on the drawing.
What is meant by clearance on an aircraft drawing? The amount of space, or separation, that is allowed between two components or parts.
What information is given in the title block of an aircraft drawing? The name and address of the company who made the part, the name of the part, the scale of the drawing, the name of the draftsman, the name of the engineer approving the part and the number of the part (the drawing number).
How are dimensions shown on an aircraft drawing? By numbers shown in the break of a dimension line.
How can you know that the aircraft drawing you are using is the most current version of the drawing? By the number in the revision block and by the log of the most recent drawings.
How many views can there be in an orthographic projection? Six.
How many views are used to show most objects in an aircraft drawing? Three.
What is the purpose of a center line on an aircraft drawing? This is the line that shows the center of the object in the drawing.
What is a fuselage station number? The distance in inches from the datum, measured along the longitudinal axis of the fuselage.
Where is the title block normally located on an aircraft drawing? In the lower right-hand corner of the drawing.
What is the purpose of a cutting plane on an aircraft drawing? It shows where an object has been cut to allow an auxiliary drawing to be made. The arrows on a cutting plane show the direction the auxiliary drawing is viewed.
How is the alternate position of a part shown on an aircraft drawing? By a thin line made up of a series of long dashes separated by two short dashes.
Created by: Aima2019
Popular Aviation sets

 

 



Voices

Use these flashcards to help memorize information. Look at the large card and try to recall what is on the other side. Then click the card to flip it. If you knew the answer, click the green Know box. Otherwise, click the red Don't know box.

When you've placed seven or more cards in the Don't know box, click "retry" to try those cards again.

If you've accidentally put the card in the wrong box, just click on the card to take it out of the box.

You can also use your keyboard to move the cards as follows:

If you are logged in to your account, this website will remember which cards you know and don't know so that they are in the same box the next time you log in.

When you need a break, try one of the other activities listed below the flashcards like Matching, Snowman, or Hungry Bug. Although it may feel like you're playing a game, your brain is still making more connections with the information to help you out.

To see how well you know the information, try the Quiz or Test activity.

Pass complete!
"Know" box contains:
Time elapsed:
Retries:
restart all cards