Welcome to StudyStack, where users create FlashCards and share them with others. Click on the large flashcard to flip it over. Then click the green, red, or yellow box to move the current card to that box. Below the flashcards are blue buttons for other activities that you can try to study the same information.
Reset Password Free Sign Up

Free flashcards for serious fun studying. Create your own or use sets shared by other students and teachers.

Remove ads
Don't know (0)
Know (0)
remaining cards (0)
To flip the current card, click it or press the Spacebar key.  To move the current card to one of the three colored boxes, click on the box.  You may also press the UP ARROW key to move the card to the "Know" box, the DOWN ARROW key to move the card to the "Don't know" box, or the RIGHT ARROW key to move the card to the Remaining box.  You may also click on the card displayed in any of the three boxes to bring that card back to the center.

Pass complete!

"Know" box contains:
Time elapsed:
restart all cards

Embed Code - If you would like this activity on your web page, copy the script below and paste it into your web page.

  Normal Size     Small Size show me how

case study tuesday


Calculate static compliance VT _________ Plat-peep
Normal Static compliance? 60-100ml/cmH20
What is critical Cs? <30ml is critical
What is normal MAP? <or=25 cmH20
what is Raw calculation? Pip-Plat ________ Flow/60
what is normal Raw? 5-10cmH20; COPD= 10-20cmH20; ARDS= 15-30cmH20
Calculate Minute volume VT/rr
calculate Alveolar ventilation 1ml/lbs.for vd. VA=(VT-vd)x rr should be almost same as Ve
Calculate exhaled minute volume VTxRR
spontaneous Ve? spontVTxspontRR
Calculate total Ve (mandVT)(mandF)+ (SpontVT)(SpontF)
Calculate TCT TCT=60/f
Calculate Ti VT _______ flow/60
To lengthen the I:E ratio in VC-CMV what could you adjust? 1.increase Rate 2.increase VT 3.decrease the flow
Created by: meyoufools

bad sites Copyright ©2001-2016  StudyStack LLC   All rights reserved.