click below
click below
Normal Size Small Size show me how
DCV's
DCV Fundamentals
Question | Answer |
---|---|
how many Positions can a DCV have? | 2,3,or 4 |
The center configuration used with hydraulic motors is typically? | Open/ Float Center |
The Center configuration typically used with cylinders is? | Tandem/Closed Center |
The purpose of a DCV is to? | Stop, Start, Change Direction and Regulate Speed. |
DCV operators could be? | Lever, Solenoid, Push Button, Pilot operators |
A detent on a DCV allows the operator to? | Lock the Valve in position to allow hands free operation. |
A Pilot operated DCV can be controlled by? | Electric and Hydraulically controlled. |
A Mobile DCV may contain | Load check Valve, Circuit Relief, and Anticavitation valve. |
On a Cylinder spool metering notches allow the operator to? | Feather the actuator lightly allowing for safe and precise control of the implement. |
On a Closed center DCV all four ports are? | Blocked stopping flow in all port paths. |
On an Open Center DCV all four Ports are? | Open to one another allowing flow in all port paths. |
We refer to a Center configuration that utilizes P and T ports open to one another and work ports A and B closed as a? | Tandem Center Valve. |
We refer to a DCV that has ports A, B and T open to one another and port P closed as a? | Float Center Valve. |
A tandem Center valve will? | Block the work ports locking the cylinder into position. |
A Float position in a DCV allows an operator to? | relieving the pressure on both sides of the cylinders allowing the implement to follow the contour of the ground. |