ccent Word Scramble
|
Embed Code - If you would like this activity on your web page, copy the script below and paste it into your web page.
Normal Size Small Size show me how
Normal Size Small Size show me how
Question | Answer |
Commands to configure RIP routing? | router rip network 10.0.0.0 (NOT 10.4.0.0, as classful) |
Command to show routing table? | show ip route |
Command to show realtime RIP routing updates? | debug ip rip |
Command to create a static route for network 172.17.0.0 to 172.16.0.1? | ip route destNetwork-IP dest-subnetMask nextHop-IP (ip route 172.17.0.0 255.255.0.0 172.16.0.1) |
Command to set default route to network 206.143.5.0, in 3 ways? | ip route 0.0.0.0 0.0.0.0 206.143.5.2 ip route 0.0.0.0 0.0.0.0. s1 ip default-network 206.143.5.0 ip classless (at the end of each) |
Command always required to set default route? | ip classless |
Commands to stop sending routing info from s0/0? | router rip network 192.168.0.0 passive-interface serial 0/0 |
What prevents routing loops with flapping interfaces? | Holddown timers |
What prevents routing loops by not sending info out from the same interface the info came from? | Split horizon |
What prevents routing loops by sending max hop count 16 when a link fails? | Route poisoning |
What is AD of connected interface? | 0 |
What is AD of static route? | 1 |
What is AD of EIGRP? | 90 |
What is AD of IGRP? | 100 |
What is AD of OSPF? | 110 |
What is AD for IS-IS? | 115 |
What is AD for RIP? | 120 |
What is AD for External EIGRP? | 170 |
What is AD for unknown? | 255 |
Commands to configure RIPv2? | router rip network 192.168.40.0 version 2 |
What is max hop counts for RIP/IGRP? | RIP - 15 IGRP - 255 |
How often does RIPv1/RIPv2/IGRP send full routing table update? | RIPv1/v2 - every 30 seconds IGRP - every 90 seconds |
Command to show routing protocols configured on router? | show ip protocols |
Command to cancel propagating a network 192.168.10.0? | no network 192.168.10.0 |
Command to disable RIP? | no router rip |
What is update/reply from a router to the router from which it received Route Poisoning, saying it has received Route Poisoning? | Poison reverse |
What are two classes of routing protocols regarding AS? | IGP (Interior Gateway Protocols) & EGP (Exterior Gateway Protocols) |
Is BGP a IGP or EGP? | EGP |
What are three classes of routing protocols? | Distance vector Link-state Advanced distance vector (balanced hybrid) |
Commands to configure DHCP server - address pool called myPool with network 10.1.8.0/24, default-gateway 10.1.8.1, DNS server 10.1.8.100 & 10.1.8.101, domain name myDomain.com? | config t service dhcp ip dhcp pool myPool network 10.1.8.0 255.255.255.0 default-router 10.1.8.1 dns-server 10.1.8.100 10.1.8.101 domain-name myDomain.com exit ip dhcp excluded-address 10.1.8.1 |
What's in flash memory? | IOS (.BIN file) |
What's in NVRAM? | Startup-config |
What's in (D)RAM? | Running-config. |
What's in ROM? | POST, Bootstrap & Mini-IOS |
What does router do if configuration register is 0x2102? | Boot from NVRAM (derault). (Startup-config) |
What does router do if configuration register is 0x2101? | Boot from ROM. (Mini-IOS) |
What does router do if configuration register is 0x2142? | Ignore NVRAM. (Password recovery) (Rom Monitor - ROMMON mode) |
What command to see neighbor router's IP address? | show cdp neighbors detail (NOT neighbor. NOT details) |
What command to see neighbor router's hostname, local int, platform and remote port? | show cdp neighbors (NOT neighbor) |
What command to terminate a telnet session? | exit |
What key combination to get back to console whilst keeping telnet session? | Ctrl + Shift + 6, release it, then X |
What command to check telnet sessions from your router to remote device? | show sessions |
What command to build static host table? | ip host hostName IPaddress |
Command to check host table? | show hosts |
Old command to do the same as copy start run? | config mem |
What's key combination to interrupt router boot sequence? | Ctrl + Break |
Command to show interface traffic including CDP packets sent/received and CDP errors? | show cdp traffic |
Command to show CDP status on router interfaces or switch ports? | show cdp interface |
Command to check active consoles and VTY ports in use on your router? | show users |
Command to change Configuration Register to 0x2101? | config-register 0x2101 |
Command to turn off CDP on s0/0/0? | config t int s0/0/0 no cdp enable |
Command to turn off CDP on router? | no cdp run |
In ROMMON mode of ISR/2600, command to change Configuration Register to 0x2142? | confreg 0x2142 reset |
In ROMMON mode of 2500, command to change Configuration Register to 0x2142? | o/r 0x2142 |
Command to show current IOS name, size and size of flash memory? | show flash |
Which is correct on router, tracert or traceroute? | traceroute |
Command to see console messages (e.g. debug) through telnet? | terminal monitor |
Commands to configure DNS server 192.168.10.1 and default domain name mydomain.com? | config t ip domain-lookup ip name-server 192.168.10.1 ip domain-name mydomain.com |
Command to turn off domain lookup? | no ip domain-lookup |
Every ( ) seconds CDP sends update as default? | 60 |
Which layer does CDP work? | Data Link (as it does not require IP address) |
Is CDP on as default on Cisco routers? | Yes |
Command to display ARP cache (IP-MAC table)? | show ip arp |
Created by:
firewitch1soulwriter
Popular Computers sets