CCNA 3-4 Concepts
Help!
|
|
||||
|---|---|---|---|---|---|
| Set STP Bridge ID | spanning-tree vlan 1 priority 4096
🗑
|
||||
| Set STP Bridge ID to default | spanning-tree vlan 1 priority
🗑
|
||||
| "Display STP root ID | Bridge ID
🗑
|
||||
| Display STP Summary | show spanning-tree summary
🗑
|
||||
| Display STP Root Bridge status and config | show spanning-tree rooot
🗑
|
||||
| Display STP Detail | sh spanning-tree detail
🗑
|
||||
| Display STP interface stats and config | sh spanning-tree interface
🗑
|
||||
| Display STP blocked ports | sh spanning-tree blockedports
🗑
|
||||
| Create a VLAN | (config) vlan 456
🗑
|
||||
| Name a VLAN | name vlan for engineering
🗑
|
||||
| Assign a port to a VLAN | switchport access vlan 456
🗑
|
||||
| Assign a range of ports to a VLAN | interface range fa0/(start) - (end)
🗑
|
||||
| Display a list of VLANs | sh vlan
🗑
|
||||
| Display a brief list of VLANs | sh vlan brief
🗑
|
||||
| Display a specific VLAN by number | sh vlan id 456
🗑
|
||||
| Display a specific VLAN by name | sh vlan name engineering
🗑
|
||||
| Delete a VLAN | (config) no vlan 456
🗑
|
||||
| Disassociate a port from a specific VLAN | (config-if) no switchport access vlan 456
🗑
|
||||
| Configure a port as trunk | (config-if) switchport mode trunk
🗑
|
||||
| Configure a trunk port encapsulation | "(config-if) switchport trunk encapsulation dot1q (isl
🗑
|
||||
| Configure a port as access | (config-if) switchport mode access
🗑
|
||||
| Configure a port automatically for trunk/access | (config-if) switchport mode dynamic (desirable/auto)
🗑
|
||||
| Assign native VLAN ID to a trunk | (config-if) dot1q native vlan 456
🗑
|
||||
| OSPF Config Mode | router ospf 1
🗑
|
||||
| OSPF Network Command | network x.x.x.x w.w.w.w area 0
🗑
|
||||
| Standard ACL | access-list [num] permit host h.h.h.h
🗑
|
||||
| Extended ACL | access-list [num] deny tcp h.h.h.h w.w.w.w d.d.d.d w.w.w.w eq telnet
🗑
|
||||
| ACL with Remark | access-list [num] remark TEXT STRING
🗑
|
||||
| List ACLs | sh access-lists [num]
🗑
|
||||
| List ACLs on interfaces | sh ip interface
🗑
|
||||
| Creating a NACL | ip access-list extended SALES-ONLY
🗑
|
||||
| Add an ACL to a VTY line | access-class [num] in
🗑
|
||||
| ACL for established traffic | access-list 101 permit tcp any any established
🗑
|
||||
| logging ACL | [ACL STATEMENT] log
🗑
|
||||
| Specifying a syslog server | logging 193.168.3.11
🗑
|
||||
| set time zone | clock timezone CST -6
🗑
|
||||
| set clock | clock set 10:25:00 Sep 10 2007
🗑
|
||||
| Static NAT step 1 | ip nat pool public_access 209.165.200.242 209.165.200.253 netmask 255.255.255.224
🗑
|
||||
| Static NAT step 2 | access-list 1 permit 10.10.10.0 0.0.0.255
🗑
|
||||
| Static NAT step 3 | ip nat inside source list 1 pool public_access
🗑
|
||||
| Static NAT step 4 | assign inside and outside NATs to interfaces
🗑
|
||||
| Static NAT map | ip nat inside source static 10.10.10.2 209.165.200.225
🗑
|
||||
| Floating Static Route | ip route 192.168.4.0 255.255.255.0 192.168.9.1 200
🗑
|
||||
| Turn off routing updates on a interface | (conf-if) passive-interface
🗑
|
||||
| turn on RIP debugging | debug ip rip
🗑
|
||||
| set up EIGRP | (config) router eigrp 1
🗑
|
||||
| Displays successors and feasible in EIGRP | sh ip eigrp toplogy
🗑
|
||||
| Displays number of EIGRP packets | sh ip eigrp traffic
🗑
|
||||
| Displays feasible successor activity | debug eigrp fsm
🗑
|
||||
| Summarize EIGRP network | ip summary-address eigrp 75 10.10.10.0 255.255.0.0
🗑
|
||||
| Turn on PPP | (config-if) encapsulation ppp
🗑
|
||||
| Turn on PPP Compression | (config-if) compress [predictor | stac]
🗑
|
||||
| Turn on PPP load balancing | (config-if) ppp multilink
🗑
|
||||
| HDLC PPP state of interfaces | show controllers
🗑
|
||||
| HDLC PPP keep alive packets | debug serial interface
🗑
|
||||
| PPP process debug | debug ppp
🗑
|
||||
| VTP Setup #1 | (config) vtp domain domain_name
🗑
|
||||
| VTP Setup #2 | (config) vtp mode {server | client | transparent}
🗑
|
||||
| VTP Setup #3 | (config) vtp password password
🗑
|
||||
| RIPv2 propagate default route | (config-router) redistribute static
🗑
|
Review the information in the table. When you are ready to quiz yourself you can hide individual columns or the entire table. Then you can click on the empty cells to reveal the answer. Try to recall what will be displayed before clicking the empty cell.
To hide a column, click on the column name.
To hide the entire table, click on the "Hide All" button.
You may also shuffle the rows of the table by clicking on the "Shuffle" button.
Or sort by any of the columns using the down arrow next to any column heading.
If you know all the data on any row, you can temporarily remove it by tapping the trash can to the right of the row.
To hide a column, click on the column name.
To hide the entire table, click on the "Hide All" button.
You may also shuffle the rows of the table by clicking on the "Shuffle" button.
Or sort by any of the columns using the down arrow next to any column heading.
If you know all the data on any row, you can temporarily remove it by tapping the trash can to the right of the row.
Embed Code - If you would like this activity on your web page, copy the script below and paste it into your web page.
Normal Size Small Size show me how
Normal Size Small Size show me how
Created by:
Zipposan
Popular Computers sets