| Question |
 |
|
| Answer |
|
|
| What kind of APU is on the aircraft? |
• Sundstrand APS 2300 |
| Describe the APU |
• Constant speed• Single-stage impeller with a 2-stage axial-flow turbine• Independent oil system |
| What controls the APU? |
• A dedicated FADEC |
| What battery is used for the APU start? |
• BATT 2 powers the starter• BATT 1 powers the FADEC and EICAS for monitoring |
| What is the fuel source for the APU? |
• Right fuel tank• Left fuel tank through the crossfeed valve |
| What fuel pump is used for APU start? |
• Batteries ‘ON’ only DC fuel pump in right tank• AC powered airplane ACMP 2 • Right engine running Ejector fuel pump |
| Will the APU shutdown automatically if speed and acceleration rate isn’t reached in starting cycle time? |
• Yes |
| What does moving the APU start switch to ‘OFF’ do? |
• Initiates normal APU shutdown• 1-minute cool down• No pneumatics (electrics only for 1 minute) |
| Can the APU shutdown be cancelled? |
• Yes, by moving the START switch back to ‘ON’ before the 1-minute cool down is over |
| How is the APU shutdown immediately? |
• APU emergency stop button• No 1-minute cool down period |
| What will happen if batteries are turned OFF during the 1-minute cool-down period? |
• APU will shut down immediately |
| When will automatic shutdown of the APU occur?Ground: |
• Ground: Overspeed Underspeed FADEC critical fault Fire Overheat Low oil pressure |
| When will automatic shutdown of the APU occur?Flight: |
• Flight: Overspeed Underspeed FADEC critical fault |
| Can the APU be started after a critical fault? |
NO |
Beef Production
